If you have already created an account and added a project to it. Then follow the following steps. 1. Login to your account. 2. Click 'Installation & Configuration' 3. Click on 'Install Code'. 4. Using the mouse highlight/select ALL the code. (if your website is using frames click the frames option, and hit the submit button to generate frames code first) 5. Right-click with the mouse and click copy. (if your a mac user, go to edit and click copy) 6. Open up a program called 'notepad' or another simple text editor. Do not use FrontPage or any HTML software for this as these programs could corrupt the code. 7. Using notepad open up your homepage file, it may be called index.html or something similar. (If you don't know how to do this because someone else designed or hosted your website for you then we suggest you get in contact with them to add the statcounter code.) 8. Right click with the mouse anywhere after you see the
No. You may not alter the code.
Yes! This is available to all upgraded accounts. If you have an upgraded account simply login to StatCounter. - Click the "wrench icon" beside your project name. - Click the "install code" link - Follow the wizard and be sure to tick the box when it asks if you want the "secure tracking code".
If the code is installed fine, then are you sure you are getting visitors? Did you configure StatCounter counter to block your visits with a cookie, or to block them based on your IP address? Try to get a friend to visit your website, and see if they get recorded. If that doesn't work then you may also have other javascript that comments out our code by accident. Or perhaps some badly formed HTML. If it still doesn't work, then create a very basic test page to see if it works on that page. Or you can also try moving the StatCounter code nearer to the top of the page.
Yes. Absolutely. It is highly recommended that you install the same counter code onto all your pages. This allows you to track your user behaviour - how they navigate around your site and not all your visitors find your site from the homepage.
Yes. Firstly configure exactly how you want your counter to look on your homepage. 1. Login to your account 2. Go to 'my projects' 3. Click the 'installation and configuration' icon 4. Click the "configure counter" link 5. Configure your counter to blend in perfectly with your homepage Now you need to install the code onto your homepage. 6. From the side menu then click the "install code" link 7. Insert the default code into the homepage of your website Now you need to install the code onto the rest of your pages. 8. Then tick the "invisible counter" box and click the "generate code" button. 9. Take this code and insert it into the rest of the pages of your website. You now have a perfectly configured counter for your homepage, and an invisible counter for the rest of your pages.
It is very likely that there is other javascript that comments out our code by accident. Or perhaps some badly formed HTML. Create a very basic test page to see if it works on that page. Or you can also try moving the StatCounter code nearer to the top of the page. To fix the error on your page make sure that all opened tags are also closed.
Yes. It will work great with your company's intranet once you have access to the internet while using your intranet.
You simply need to place the code anywhere between the
Blogspot is now Blogger.com. Please select "Blogger" from the "web page editor" drop-down and install according to the instructions displayed.
In order to use StatCounter on My Space please follow these steps: (1) Create a new project within your StatCounter account. (2) Create a HTML only, Image Counter using the set up wizard. (Note that the options for HTML only code and Image Counter will be presented to you during the steps in the set up wizard.) (3)Copy this code and past it into the About Me section of your My Space profile and save the changes. If you picked a visible counter you will be able to see your visitor count on the profile page. All your stats will now also start collecting in your StatCounter account. Note that ONLY the HTML-only counter can be added to My Space pages. It is not possible to use the full javascript code. In addition, the Counter Image Counter must be chosen (NOT the Text Counter). Both of these options are found in the StatCounter set-up wizard. Please note that, in the past, My Space have blocked the use of StatCounter on My Space profiles. Although StatCounter is currently (April 2008) working well on My Space it is possible that My Space could again decide to block StatCounter in the future.
IMPORTANT: You can only use a HTML counter on multiply.com To add Statcounter to your Multiply account do the following: Log onto your Statcounter account. Go to “My Projects” and select “Add New Project”. Add the URL of your multiply site. The following screens allow you to customize your counter. On the "Installation Options" screen select "HTML only". Now press the "next" button and your code will be displayed on the screen. Copy and paste this code into the “Welcome Note” section of Multiply.
When setting up StatCounter via our “code setup wizard” choose Friendster. This option is the 5th page in when you follow along in the setup wizard. The section says “please choose your blog/web site editor”. Select the arrow and scroll down until you get to friendster. Copy the code that is generated. Log into your Friendster account. Choose to “configure” your blog and paste in the StatCounter generated code under: Blog Basics: My Blog (Blog Description/Catchphrase). Make sure you then choose the “publish my site option”
Set up a StatCounter account and use the installation wizard to create your StatCounter code. Now follow these directions: 1. Highlight the StatCounter code with your mouse. 2. Copy the code by right-clicking and selecting "copy". 3. Log in to your ComfyPage site. 4. Go to "Site manager". 5. Go to "Borders" 6. Click on edit "footer". 7. Click the embed service button. (This is the grey and yellow icon near the "smiley" icon on the toolbar.) This opens a text box on your screen. 8. Paste the code into this box by right-clicking in the empty box and clicking "paste". 9. Click OK. 10. Don't forget to hit to save! NOTE: You must enter the StatCounter code using the Embed Service Button. Do NOT paste the code into your footer only as this will not work!!
1. Login in your WebSite Tonight Editor. 2. At the top click on Design and then Page Designer option. 3. Click on Page Properties tab at top. 4. At the bottom, under heading JavaScript - paste your StatCounter code. 5. Click Publish button at top. Alternative instructions: 1. From the Design menu, click Page Designer . 2. If necessary, from the Select Page list, select the page you want to add the script to. 3. Click the block you want to add the script to. Blocks are outlined in blue. 4. From the toolbox select Tables & Objects. The Tables & Objects area expands. 5. From Tables & Objects, select Insert Object, then select Script from the list. 6. In the Enter JavaScript text box, enter the JavaScript code you want to insert. 7. Click OK.
1. Sign into Tripod 2. Click Sitebuilder tab from the set of tabs on the bar at the top. Make sure that your HOME PAGE is displayed. 3. Click Site Add ons icon at the bottom. 4. Click one of the locations at the bottom of the web page that show up where you want to place the code and see the StatCounter icon. It is a good idea to have this icon show because it will prove that the Statcounter code is active in that page. It will be a small line saying Add your Site Add on here. This is where the Statcounter icon will show up. 5. Click on Business Tools 6. Click on Add next to the Add HTML code here 7. Copy and Paste the Statcounter html code in the box provided. 8. Click on Done tab at the bottom of the box. This will automatically save your code to ALL the web pages in your site, besides your Home page. 9. Click the publish to Web icon
If you are using Do It Myself, FirstStepSite® or WebSiteNOW!™, you will be able to edit your web site online through Account Manager. Once logged into your account, open your web site for editing by selecting the appropriate web site from the Domains/Services menu. 1. Generate the default version of the StatCounter code. 2. Choose the page to edit from the editor drop-down 3. Click Edit page from the left-hand column 4. Click pencil in text area 5. Make sure that the "Text" radio-button is checked, then click "Continue" 6. Click Enable Basic Editor 7. Paste the StatCounter code on the next line beneath the HTML code. 8. Preview, then click "continue" and "finish" 9. Repeat with all pages, choosing each page from the drop-down. 10. Preview and publish site.
Log into Admin On the top Navigation bar Click Web Site On the Left Navigation bar Click Site Visitor Tracking Code Enter the custom tracking code provided by StatCounter. This code will be inserted in the source code of each of your web pages, near the bottom of the page code. Submit Changes
1. Log into googlepages.com 2. click on the page to edit 3. Click the "footer" section, then "edit html" found in lower right-hand corner of the page 4. Paste your StatCounter code into the footer. 5. Click the "Update" button 6. Publish page
#1 Login in to Yahoo Small Business Account #2 Click on 'Store Control Panel' link #3 Under 'Edit' heading click on 'Store Editor' link. #4 Click on 'Variables' link at extreme top. #5 At the middle of page, for 'Html-below-left-nav' field paste your statcounter code and click on 'Update' button at top. #6 Final step is to click on 'Publish' link at the extreme top to make your changes live.
Login to your account > click the 'installation & configuration' icon > click the 'install code' link.
Copyright 1999-2008 © StatCounter, All rights reserved. Privacy Policy | Terms and Conditions
